The Ghost Immobiliser
Immobilisers are a potent tool in the fight against vehicle theft. They prevent the car from being started without a key fob. They also are effective in stopping hotwiring and other traditional methods of vehicle theft. However, newer methods like key cloning and relay theft are becoming more common.
The Ghost Immobiliser was designed to combat these new trends and make your car unnoticeable. It is quiet and discreet and does not use radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA approved product and has been approved by insurance companies. It is almost undetectable by thieves and operates silently. It uses buttons on your steering wheel, center console and doors to create a unique pin code sequence that must be entered before you are able to start your vehicle. You can create up to 20 different sequences for increased security. The system is simple to install and doesn't require any additional hardware.
It is recommended to choose a reputable installer of CAN immobilisers that is skilled in your particular vehicle model to get the best results. Ideally, they will have a workshop located in your local area to enable you to visit and get your installation completed. There is also a range of tools and materials that will help you with the installation. They will provide basic hand tools, multimeters insulation tape and heat shrink tubing for protecting connections. A user's manual will offer specific instructions for the wiring in your vehicle.
Connect the battery prior to beginning the installation to avoid short circuits or airbag deployment. It is crucial to confirm the location of the CAN H and CAN L wires as the wrong identification could result in unintentional system integration. It is recommended to mark the wires using tiny pieces of tape or label them. Finally, utilize a multimeter for verification that the power source you have identified provides a consistent 12V supply.
Advanced thieves employ different methods to evade the Ghost Immobiliser. These include blocking and making false signals. These methods are based on amplifying the signal transmitted from your key fob to the electronic control unit of your vehicle. With advanced anti-jamming technologies and constant monitoring, your vehicle can be protected from these sophisticated attacks.
Security enhancing
A ghost immobiliser provides an additional layer of protection to your car against theft. It uses a PIN protection system that can be entered using buttons on the dashboard or steering wheel, making it harder for thieves to take your car. The device is also designed to be hidden within your vehicle, without LEDs or other signals that could signal a potential criminal to its presence. It connects directly to the ECU of your car through the data bus. This means that it isn't vulnerable to hacking or relay attacks.
It's a great option for those who own expensive cars that are at a higher chance of being stolen due to their price and the popularity of their vehicles. Its security features are enhanced to protect against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers are paired with apps, so you can arm and dearm quickly. They can include a service/valet setting that allows you to temporarily deactivate the immobiliser while your vehicle undergoes repairs or service.
A ghost immobiliser has another excellent feature that is that it doesn't need any wire cutting. This is a great option, particularly if you are driving a car that does not have any immobiliser built-in technology. Some systems may also be capable of integrating with a GPS tracking device, providing an additional level of security for your vehicle. A GPS tracker may also reduce your insurance rates. If you opt to buy ghost immobilisers ensure that it is TASSA certified and a professional installer will install it for you.
Compatible with all major models and brands
The Ghost Immobiliser is designed to work with all major brands and models of vehicles protecting your vehicle from theft. It utilizes buttons on your steering wheel, the centre console, or door panels to generate a unique pin code, which must be entered before you can drive your car. The system is tamper-proof, undetectable, and backed by three-year warranty. It is also fully certified by insurance providers and insurance companies, which means it can reduce your premiums.
Unlike standard immobilisers, which make use of your key fob to control the ignition however, the Ghost system works by connecting directly with the engine controller unit through the CAN data bus. This means it's impervious to tampering, and is virtually impossible to remove or disable and is not hacked by organised car thief criminal gangs. Additionally it is possible to use the Ghost system can be paired with an encrypted iPhone app that allows for remote monitoring and management.
You can set a PIN code that is easy to remember, but mathematically, it is impossible for thieves to figure out. The PIN can be customised and changed at any time, so you can keep your car safe even when you park it on the street or in a public parking lot. You can also select a valet or service mode if you need someone who is not driving your car for a brief period for instance, when it's in garage for maintenance. This feature can also to prevent your car from being stolen by a shady mechanic. You can choose the Ghost Call alert to give you extra peace of mind. ghost autowatch immobiliser will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser is a highly effective security system, securing your vehicle against common theft methods like key cloning and relay attacks. It connects to the car's CAN network and preventing communication with the engine ECU. This makes it impossible for thieves to copy or hack your vehicle, which makes the installation of this system a good idea for all drivers.
Once the system is installed, you'll need to enter a PIN number that is up to 20 digits using the buttons on your dashboard and steering wheel to begin the engine. The system is completely hidden, and therefore undetectable by thieves. It does not emit radio frequency signals. It can also be configured to allow an individual-changeable PIN code which adds security. The system is designed to avoid circuit-cutting, making it almost impossible to alter.
If you do have a problem remembering your PIN, there are some systems that allow you to communicate with the immobiliser via an app on your smartphone and instantly disarm it. Some systems also have a service/valet setting that allows you temporarily to start your car, for example when you drop it off at valet or garage.
The Ghost Immobiliser also is undetectable by thieves, as it transmits no radio signals. This is a significant advantage compared to other aftermarket security systems. It is also easy to use and doesn't require complicated wiring. You can also use it in conjunction with a dash camera for additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system is able to be hardwired to guarantee maximum performance and longevity.
Installation
It is crucial to select the most effective immobiliser ghost to protect your car from thieves. This device can prevent car thefts by blocking the communication between key fobs and the engine controller unit. This device prevents thieves from stealing the signal used to start your vehicle. It can also detect any signs of manipulation and alert the vehicle owner.
The device is easy to install and integrates with the vehicle's existing systems. It requires no modification to the vehicle's wiring and can be tucked away in a hidden area, like under the dashboard. To ensure that the device has been properly installed, follow the instructions in the user's manual. After installation, it's crucial to test the system. This will confirm that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 immobiliser and have it installed by a reputable installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to take it off or bypass the system. The installation process typically takes about 2 hours.
It is recommended that you consult the wiring diagram of your vehicle prior to the installation process. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. Double-check all connections to make sure they are safe and well-insulated.
Once the installation is complete, you can use the Ghost Immobiliser in normal operation. It will disable the ignition of your vehicle if it isn't started with the correct PIN code, which you can create yourself. The ghost immobiliser cost can also be put into service/valet mode when you have to surrender your vehicle for maintenance or valet parking.